You can use a red light filter to reduce the amount of light that is scattered by the atmosphere, which will make it easier to make out fine details in the picture. The image will be slightly fuzzy, but it should still be clear enough to see details. When the image is sharp enough, turn the focuser knob all the way to the left to increase the magnification, and then turn it back to its original position to return to normal viewing. If you are using a telephoto lens, you may need to focus the lens to obtain sharp images. Use a wide-open aperture (f/5.6 or f/8.0) to get a sharp, crisp image. When you get the telescope roughly aligned, use the small finder scope on the side of the telescope to look through the eyepiece at the object you want to photograph. If you want to align the telescope tube with the target, you have to start with the moon. How do you use a Tasco spacestation telescope? The tripod should also be set to allow you to raise and lower it without having to worry about it falling off. This is especially important if you plan to use a camera with a wide angle lens, such as the Canon 5D Mark II or the Nikon D7100. If you are using a monopod or similar device, be sure to set it up in such a way as to prevent it from tipping over. If the camera is mounted on a tripod, make sure the tripod is set up so that it is perpendicular to the ground. When the sun is high in the sky and the moon is low, most cameras shoot the best pictures. You can increase the field of view with the trail camera higher up on the tree or post. The trail cameras should be mounted high. How high should a trail camera be off the ground? Why is my trail cam not taking pictures?.Do I need to format SD card for trail camera?.Why is my SD card not working in my trail camera?.How do you use a Tasco spacestation telescope?.How high should a trail camera be off the ground?.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |